Interactive pinout for the TRIOE board. Use the filters to highlight pins by function category, hover a pin to see its name, or click to inspect its full capabilities.
Filter by function
Function guide
SPEAKER
Speaker audio output terminal (S+ / S-).
Application: Connect onboard or external speaker for sound output.
BATTERY
LiPo / Li-ion battery power input (B+ / B-).
Application: Power board via rechargeable 3.7V battery.
PWM
Pulse Width Modulation output with adjustable duty cycle.
Application: LED dimming, motor speed control, and servo control.
GPIOX
General-purpose digital input/output pin.
Application: Read buttons/sensors and drive LEDs, relays, or logic.
JTAG/USB
JTAG debug interface and USB programming/communication.
Application: Firmware flashing, serial monitor, and chip debugging.
ADCX_CH
Analog-to-digital converter input channel.
Application: Measure analog sensors like voltage, light, or temperature.
TOUCHX
Capacitive touch sensing input.
Application: Touch buttons, sliders, and wake-up interaction.
I2C
Inter-Integrated Circuit bus for two-wire communication (SDA/SCL). Like UART, these I2C signals can be mapped to available GPIO pins.
Application: Connect sensors, RTC chips, EEPROM, and IO expanders.
SPI
High-speed synchronous serial interface. Like UART, these SPI signals can be mapped to available GPIO pins.
Application: Connect displays, flash memory, ADC/DAC, and fast peripherals.
Other
Special peripheral or alternate capabilities.
Application: Use for board-specific features when needed.
SERIALX
Hardware serial (UART) communication signal.
Application: Connect to GPS, modems, MCUs, or USB-to-UART adapters.
STRAP
Boot strapping pin sampled during reset.
Application: Select boot modes and startup behavior.
RTC
Pin in the RTC power/IO domain.
Application: Low-power wake-up, retention, and deep-sleep functions.
GND
Ground reference (0 V).
Application: Common return path for power and all signals.
5V
5-volt power rail.
Application: Power external modules requiring 5 V input.
3.3V
3.3-volt regulated power rail.
Application: Power 3.3 V sensors and logic peripherals.
MISC
Miscellaneous board-specific functionality.
Application: Reserved or specialized features not in core categories.
CLK_OUTX
Clock output signal from an internal clock source.
Application: Provide timing/reference clock to external devices.
Click a pin to inspect it
Pin reference
| No. | Name | Type | Function |
|---|---|---|---|
| 1 | GND.1 | G | GND |
| 2 | 5V.1 | P | 5 V power supply |
| 3 | 3V3.1 | P | 3.3 V power supply |
| 4 | D1 | I/O/T | RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0 |
| 5 | D2 | I/O/T | RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1 |
| 6 | TX | I/O/T | U0TXD, GPIO43, CLK_OUT1 |
| 7 | RX | I/O/T | U0RXD, GPIO44, CLK_OUT2 |
| 8 | D42 | I/O/T | MTMS, GPIO42 |
| 9 | D41 | I/O/T | MTDI, GPIO41, CLK_OUT1 |
| 10 | D40 | I/O/T | MTDO, GPIO40, CLK_OUT2 |
| 11 | D39 | I/O/T | MTCK, GPIO39, CLK_OUT3, SUBSPICS1 |
| 12 | D38 | I/O/T | GPIO38, FSPIWP, SUBSPIWP, RGB LED |
| 13 | D37 | I/O/T | SPIDQS, GPIO37, FSPIQ, SUBSPIQ |
| 14 | D36 | I/O/T | SPIIO7, GPIO36, FSPICLK, SUBSPICLK |
| 15 | D35 | I/O/T | SPIIO6, GPIO35, FSPID, SUBSPID |
| 16 | GND.2 | G | GND |
| 17 | 5V.2 | P | 5 V power supply |
| 18 | 3V3.2 | P | 3.3 V power supply |
| 19 | D4 | I/O/T | RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3 |
| 20 | D5 | I/O/T | RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4 |
| 21 | D6 | I/O/T | RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5 |
| 22 | D7 | I/O/T | RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6 |
| 23 | D8 | I/O/T | RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1 |
| 24 | D3 | I/O/T | RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2 |
| 25 | D9 | I/O/T | RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD |
| 26 | D10 | I/O/T | RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0 |
| 27 | D14 | I/O/T | RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP |
| 28 | D21 | I/O/T | RTC_GPIO21, GPIO21 |
| 29 | D47 | I/O/T | GPIO47, SPICLK_P, SUBSPICLK_P_DIFF |
| 30 | D48 | I/O/T | GPIO48, SPICLK_N, SUBSPICLK_N_DIFF |
| 31 | S- | SPK | Speaker Negative (-) |
| 32 | S+ | SPK | Speaker Positive (+) |
| 33 | B+ | BAT/P | Battery Positive (+) |
| 34 | B- | BAT/G | Battery Negative (-) |